The stone plastic elevator door pocket is composed of stone plastic lines and stone plastic UV plates. The whole elevator door pocket line is divided into three parts, two vertical beams and one cross beam. Before construction, the foundation of the elevator entrance shall be well prepared. The first requirement of the foundation is leveling. The gap between the elevator and the wall shall be laid with blockboard, that is, a wooden box shall be supported with Blockboard and fixed on the side plate of the elevator entrance with nails and glue. Let's talk about what kind of construction requirements he has.

石塑电梯门套是用硅密封胶和泡棉胶粘，在处置完其基础之后，然后根据现场的尺寸，先把侧板切出来，把泡棉胶先粘在板上面，然后再用硅密封胶进行点粘；之后再贴在细木工板上面，对其之后按压平整就可以。

Firstly, the stone plastic elevator door pocket is glued with silicone sealant and foam adhesive. After the foundation is disposed, the side plate is cut out first according to the size of the site, the foam adhesive is glued on the plate first, and then the silicone sealant is used for spot bonding; Then stick it on the blockboard and press it flat.

石塑线条要根据不同规格的切出一个45°角，然后用硅密封胶点粘，要同时与侧板、对角对齐。这就是石塑电梯门套线的一大特性，施工简单，省时又省力。

The stone plastic lines shall be cut at an angle of 45 ° according to different specifications, and then glued with silicone sealant, which shall be aligned with the side plate and diagonal at the same time. This is a major feature of the stone plastic elevator door pocket line. The construction is simple, time-saving and labor-saving.

石塑电梯门套的主要特性有以下几点：

The main characteristics of stone plastic elevator door pocket are as follows:

1、B1级防火、在用火烧时、无黑烟，非常的，不会对人体造成危害；

1. Class B1 fire prevention, no black smoke when burning with fire, very, and will not cause harm to human body;

2、其具有非常好的耐酸性及耐碱特性；

2. It has very good acid resistance and alkali resistance;

3、石塑电梯门套的比重非常的轻，虽然有石材的外表，但是其重量确实石材的1/10，非常有利于减少建筑物的称重及抗震能力；

3. The proportion of stone plastic elevator door pocket is very light. Although it has the appearance of stone, its weight is indeed 1 / 10 of that of stone, which is very conducive to reducing the weighing and seismic capacity of buildings;

4、石塑电梯门套还具有非常好的耐磨特性，非常容易清洁，维护的本钱也非常的低，也非常的好维护；

4. Stone plastic elevator door pocket also has very good wear-resistant characteristics, very easy to clean, the maintenance cost is also very low, and it is also very easy to maintain;

5、石塑电梯门套自重轻，因此其耐久性也非常的好，其使用的寿命也非常的长；

5. Stone plastic elevator door pocket has light weight, so its durability is also very good, and its service life is also very long;

6、石塑电梯门套因为不需要龙骨，直接粘贴即可使用，因此不仅减少了安装的时间，也减少了安装的空间；

6. Stone plastic elevator door pocket can be used directly without keel, so it not only reduces the installation time, but also reduces the installation space;

7、石塑电梯门套因为是可以直接使用标准产品的，因此很多时候其可以直接进行安装，非常的便捷，不会浪费太多的时间，大大的缩短的施工期限。

7. Because the stone plastic elevator door pocket can directly use the standard products, it can be installed directly in many cases, which is very convenient and will not waste too much time and greatly shorten the construction period.

以上就是为大家介绍的有关铝合金电梯门套的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com

The above is the detailed introduction of aluminum alloy door pocket. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sddtmt.com