More and more people like to install door jambs in the process of home decoration, because the door behind the door can greatly improve the level of the whole house decoration, making the house look more fashionable and beautiful, so it has gradually become a very popular product. Now I will explain its material to you.

1、多层板贴面门套多层板贴膜(PVC)或贴纸油漆等,由于其外表选用贴合技术,在湿润枯燥环境中贴面与之间易掉落、脱层、呈现面层起泡景象,不平坦。长期使用贴面与板材之间会发生厌氧菌,使资料发生变形,影响使用及漂亮,因而假如居室环境对比湿润,那么好不要选择此类型的,由于假如一旦呈现问题,那么其木门也会呈现一些或多或少的质量问题。

1. Multilayer panel veneer door jamb Multilayer panel veneer (PVC) or sticker paint, etc., due to the use of adhesion technology for its appearance, the veneer is easy to fall off, delaminate, and present a blistering surface in a humid and dry environment. Anaerobic bacteria will occur between the veneer and the board after long-term use, which will deform the data and affect the use and beauty. Therefore, if the living environment is relatively wet, it is better not to choose this type of door. If problems are presented, the wooden door will also present some more or less quality problems.

2、多层板UV漆饰面是一种新型的,多层板选用转印木纹,外表UV漆饰面技术,商品色泽丰满、美丽,因选用UV漆饰面从而使商品到达使用的佳状况,具有不变形、不开裂、防潮、防热、耐磨等特色。

2. The multilayer board UV paint finish is a new type. The multilayer board uses the transfer wood grain and the exterior UV paint finish technology. The color of the goods is plump and beautiful. Because the UV paint finish is selected, the goods can reach the good condition of use. It has the characteristics of no deformation, no cracking, moisture resistance, heat resistance, wear resistance, etc.

3、钢材质选用了钢质门门框的制造技术,它与门扇无色差,由钢板定形而成,外表选用转印烤漆技术。此类大多为单面线条且线条对比单一,装置办法与钢质门相同,使其失去了钢木套装室内门的实质。

3. The steel material adopts the manufacturing technology of the steel door frame, which has no color difference with the door leaf, and is shaped by the steel plate. The surface adopts the transfer printing and baking paint technology. Most of these are single sided lines with single line contrast. The installation method is the same as that of steel doors, which makes them lose the essence of steel and wood interior doors.

4、密度板材质主要选用密度板外表贴纸做油漆或贴PVC膜制造,因密度板是用秸秆纤维加胶水,经高压而成,故在吸水后会胀大、发霉、变形,在胀大后其密度大大降低,从而影响了握钉力和使用寿命,因而假如居室湿润,那么这类木门的也不太合适使用。

4. The material of the density board is mainly made of paint or PVC film pasted with stickers on the surface of the density board. Because the density board is made of straw fiber and glue under high pressure, it will swell, mildew and deform after absorbing water, and its density will be greatly reduced after swelling, thus affecting the nail holding force and service life. Therefore, if the room is wet, then this kind of wooden door is not suitable for use.