Nowadays, elevator decorative door jambs are very common. Then, what materials are usually used for elevator door jambs? They are basically stone elevator door jambs. There are two reasons for this: First, environmental protection. Traditional marble materials can experience the baptism of hundreds of years when used in buildings, but the stone resources will eventually be exhausted if kept mining. The stone plastic elevator sleeve is made of natural stone powder, PVC resin powder, chemical powder and other environmental materials under high temperature and high pressure, which wastes and exploits natural resources. And the stone plastic elevator sleeve solves the problem that natural stone joints are easy to breed.

二是便捷省心，采用石塑电梯套进行施工，表面花色也比较自然，虽然没有天然大理石那般浑然天成，但石塑电梯套饰面经过UV光固化防护处理，纹理更加自然均匀，不会出现大面积色差。

Second, it is convenient and worry free. The stone plastic elevator sleeve is used for construction, and the surface design and color are also relatively natural. Although it is not as natural as natural marble, the stone plastic elevator sleeve finish is more natural and uniform after UV curing protection treatment, and there will be no large area of color difference.

石塑电梯门套在运用的过程中，需要注意的是：在做好墙面的处理石塑电梯垭口虽轻便，但也有一定的重量，可直接胶粘安装，想要石塑电梯垭口安装更快，就要在安装材料前，将墙体处理平整，凹凸不平的地方可以用砂浆水泥抹平，这样可以更好地工作效率，以及材料的使用。

During the application of the stone plastic elevator door jamb, it should be noted that the stone plastic elevator pass is light, but it also has a certain weight, which can be directly glued for installation. If you want to install the stone plastic elevator pass more quickly, you should smooth the wall before installing materials. The uneven places can be plastered with mortar and cement, which can improve the work efficiency and use of materials.

安装加固用硅胶或者云石胶都能够进行安装，因为石塑电梯垭口的使用并不是一个短期的产品，所以希望大家挑选口碑比的胶水，确保安装的牢固度。拼接方法石塑电梯垭口的线条在转角的地方，需要用木工的切割据，两个竖线条各切顶端一个，安装时注意拼接的方向。

Silica gel or marble glue for installation and reinforcement can be used for installation. Because the use of stone plastic elevator pass is not a short-term product, we hope you can choose the glue with a reputation ratio to ensure the firmness of installation. Splicing method: The line of Shisu elevator pass is at the corner, which needs to be cut by carpenters. The top of two vertical lines should be cut one at each end. Pay attention to the splicing direction during installation.

墙面预处理将墙面进行清洁处理，清理干净的毛刺、浮沉，有坑洼的地方要使用发泡胶填平。如果要求比较高的工程，可以再墙面找平后再安装一层细木工板，然后把线条和侧板安装在细木工板上就可以，这样效果会更好。

Wall pre-treatment: clean the wall, remove the burrs, floating and sinking, and fill the potholes with styrofoam. For projects with high requirements, a layer of blockboard can be installed after the wall is leveled, and then the lines and side plates can be installed on the blockboard, which will have better effect.

为大家介绍河南睿之捷装饰工程有限公司，睿之捷电梯门套分为：侧面板、封口条、底板、门柱板四部分组成，是获得证书的新型电梯门套，公司生产的门套整体美观，性价比高，抗冲击，防火，防水，绿色无味，色泽持久统一，安装简便。

Henan Ruizhijie Decoration Engineering Co., Ltd. is introduced. The door pocket of Ruizhijie elevator is divided into four parts: side panel, sealing strip, bottom plate and door post plate. It is a new type of environmental protection elevator door pocket that has obtained a certificate. The door pocket produced by the company is beautiful overall, cost-effective, impact resistant, fireproof, waterproof, green, tasteless, durable and uniform color, and easy to install.