1. In order to ensure the brand of the enterprise and the high quality requirements of the owner, Party B should carefully cooperate with the site to check the size and confirm the drawings for production after entering the site. The finished materials entering the site should be installed in a programmed way and stacked carefully. If the plates are damaged due to Party B's random stacking, Party B should be responsible for all losses.

2．在安装时要按照图纸（有编号的板材按编号安装），特殊需要调整的板面由现场安装人员自行调整后再安装，对不能上墙的板面不要安装，及时通知工厂再补。

2. During installation, the plates shall be installed according to the drawings (numbered plates shall be installed according to the number). The plates that need special adjustment shall be installed after being adjusted by the on-site installation personnel. The plates that cannot be installed on the wall shall not be installed, and the factory shall be notified in time to make up.

3．安装时每个墙面的阳角、横竖缝、板面缺角、崩边等要修补的石材，由安装工自己在施工中及时修补好再安装。每个墙面完工后，由现场主管检查验收后，交项目部验收打包（属于加工错误，现场不能修补的由工厂派人员修理）。

3. During installation, the stone materials to be repaired, such as external corners, horizontal and vertical joints, missing corners and broken edges of each wall surface, shall be repaired by the installer himself in time during construction before installation. After the completion of each wall, the on-site supervisor shall check and accept it, and then submit it to the project department for acceptance and packaging (if it is a processing error and cannot be repaired on site, the factory shall send professionals to repair it).

4．成品材料到场后，要按照图纸对照好墙面进行安装，对因安装质量不合格，图纸尺寸于墙面不吻合引起返工，重新补板，造成材料损失，一切责任由乙方承担（属于工厂切割错误的报到工厂做调换）。

4. After the finished materials arrive at the site, the wall shall be installed according to the drawings. Party B shall bear all the responsibilities for the rework caused by the unqualified installation quality and the inconsistent size of the drawings with the wall, and the material loss caused by the re patching of the plates (if the cutting is wrong in the factory, report to the factory for replacement).

以上就是为大家介绍的有关电梯不锈钢门套的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com

The above is a detailed introduction about the stainless steel door pocket of elevator. I hope it can help you If you have any questions, please contact us We will provide you with professional service http://www.sddtmt.com