不锈钢电梯门套痕迹怎么修复?
1、用纸巾蘸酒精(工业酒精,如果不使用医用酒精)擦拭,然后将不锈钢电梯门盖的保护膜擦几遍,清洗干净。
1. Wipe with paper towel dipped in alcohol (industrial alcohol, if medical alcohol is not used), then wipe the protective film of stainless steel elevator door cover several times and clean it.
2. 使用指甲油去除剂。使用方法同酒精、丙酮。效果也很好。只要能去除指甲油,无论是质量好还是一般,都不需要指甲油。
2. use nail polish remover. The use method is the same as that of alcohol and acetone. The effect is also very good. As long as nail polish can be removed, no matter whether it is of good quality or general, nail polish is not required.
3. 使用丙酮。方法和上面一样。用量少,修复效果好。更妙的是,它可以快速轻松地去除这些残留的胶体,这比喷洒精华更好。
3. Use acetone. The method is the same as above. Less dosage and good repair effect. What's more, it can quickly and easily remove these residual colloids, which is better than spraying essence.
以上两种方法都是溶剂,效果更好。
The above two methods are solvents, and the effect is better.
4. 使用香蕉水。它是一种用于去除油漆的工业剂。也很容易买到(油漆哪里有卖)。方法同乙醇、丙酮。用热毛巾擦,用刀片刮,再用橡皮擦擦。它非常干净。家里有香脂。这是一件好事。用它很容易你的问题。
4. Use banana water. It is an industrial agent used to remove paint. It's also easy to buy (where can I sell paint). The method is the same as that of ethanol and acetone. Wipe with a hot towel, scrape with a blade, and then wipe with an eraser. It's very clean. There is balm at home. This is a good thing. It's easy to solve your problem with it.
上边的就是小编为大家整理的相关信息,更多的精彩内容请点击我们的网站:拉丝不锈钢电梯http://www.sddtmt.com关注获取更多精彩内容.
Above is the relevant information compiled by Xiaobian for you. For more wonderful content, please click our website: stainless steel elevator door pocket http://www.sddtmt.com Follow for more exciting content
下一篇:不锈钢电梯门套的生产制作流程!上一篇:电梯门套干挂石材的施工要注意什么?