装配式电梯门套常见污染
表面微调安装大理石装饰板,然后调整水平,如表面不均匀,双丝连接垫板垫在相应的底部底板的嘴。调整垂直度,调整不锈钢连接件在上面板上的间隙,直到面板垂直为止。
The surface shall be slightly adjusted to install the marble decorative plate, and then the level shall be adjusted. If the surface is uneven, the double wire connection base plate shall be padded on the mouth of the corresponding bottom bottom plate. Adjust the perpendicularity and the clearance between the stainless steel connector and the upper plate until the panel is vertical.
顶面装饰板的安装:在安装面板上除了后一层的顶部,根据石将军的要求,在石材挂20mm厚的木棍在长间隙的结构及安装调整,扁平的石头是250mm,挂铁件连接。可用彩色铝线吊木,挂木后,石材与墙体之间的空隙填充,填料严密,防止浆体灌浆渗漏。
Installation of top decorative plate: in addition to the top of the next layer on the installation panel, according to the requirements of General Shi, a 20mm thick wooden stick is hung on the stone to adjust the structure and installation of the long gap. The flat stone is 250mm, and the iron pieces are connected. The colored aluminum wire can be used to hang the wood. After the wood is hung, the gap between the stone and the wall shall be filled with tight filler to prevent slurry grouting leakage.
(1)打蜡时务必要运用无任何添加色料的蜡水。
(1) When waxing, it is necessary to use wax water without any added color.
(2)抛光处置,留意抛光的次第,是从里外、从左右的抛光。
(2) For polishing, pay attention to the order of polishing, which is from inside to outside and from left to right.
(3)对石塑电梯套打蜡的时分,千万不要呈现污染石材的情况。
(3) When waxing the stone plastic elevator sleeve, do not pollute the stone.
(4)避免长时间打蜡,否则石材容易呈现发黄的情况,反而起不到颐养的作用了。
(4) Avoid waxing for a long time, otherwise the stone will be prone to yellowing and will not be able to take care of itself.
(5)石塑电梯套打蜡护理周期要合理,打蜡间隔时间太短会使得透气性不佳,影响其寿命。
(5) The waxing care cycle of the stone plastic elevator sleeve should be reasonable. Too short waxing interval will cause poor air permeability and affect its life.
不锈钢是一种非常好的材料。它结实耐用,重量轻,看起来很棒。但是如果没有遵循适当的维护技术或者没有使用正确的工具,这也是一种不太宽容的材料。这里有4个简单的技巧和工具,可以让你的不锈钢电梯门套在未来的许多年里看起来很棒。不锈钢板广泛应用于公共、私人、商业、教育、交通和市政设施,如厨房、停车场、中转站、学校、大学、公共工程,并可在电梯、自动扶梯、售票亭、旋转门、大门和围栏、墙板、框架、门硬件、踢脚板、冰箱和冷冻板、售货亭、水箱以及许多其他设备上找到。
Stainless steel is a very good material. It is durable, light and looks great. However, if the proper maintenance technology is not followed or the correct tools are not used, it is also a kind of intolerant material. Here are 4 simple tips and tools to make your stainless steel elevator door jambs look great for many years to come. Stainless steel plates are widely used in public, private, commercial, educational, transportation and municipal facilities, such as kitchens, parking lots, transfer stations, schools, universities, and public works, and can be found in elevators, escalators, ticket booths, revolving doors, gates and fences, wallboards, frames, door hardware, baseboards, refrigerators and freezer boards, kiosks, water tanks, and many other equipment.
今天我们介绍的是不锈钢电梯门套的清洁技巧,也适用于其他不锈钢产品哦。
Today we introduce the cleaning techniques of stainless steel elevator door jambs, which are also applicable to other stainless steel products.
下一篇:不锈钢电梯门套知识介绍上一篇:仿大理石电梯门套安装施工流程