石塑电梯门套是由石塑线条和石塑uv板组合而成，整个电梯门套分为三个部分，两个竖梁和一个横梁。施工前先将电梯口的基础做好，基础的要求是平整，对于电梯和墙壁间的缝隙要用细木工板打基础，也就是用细木工板支一个木头盒子，用钉子和胶固定在电梯口的侧板。那么下面就给大家来讲解一下它的施工要领和材料特性吧。

The stone plastic elevator door frame is composed of stone plastic lines and stone plastic UV panels. The entire elevator door frame is divided into three parts, two vertical beams and one horizontal beam. Before construction, the foundation of the elevator entrance should be prepared, and the requirement for the foundation is to be flat. For the gap between the elevator and the wall, a wooden box should be supported with a wooden board, and fixed on the side panel of the elevator entrance with nails and glue. So let's explain its construction essentials and material characteristics to everyone below.

它的施工大概要领，就是用有机硅密封胶和泡棉胶粘。基础处理完后，然后根据现场尺寸，先把侧板切出来，把泡棉胶先粘在板子上，然后用有机硅密封胶点粘，贴在细木工板上，对齐按压平整即可；石塑线条要根据不同规格的切出一个45°角，然后用有机硅密封胶点粘，要同时与侧板、对角对齐。这就是石塑电梯门套的一大特点，施工简单，省时又省力。

The general construction method is to use organic silicone sealant and foam adhesive. After the basic processing is completed, according to the on-site size, cut out the side panel first, stick the foam adhesive onto the board, then use organic silicone sealant to stick it, and finally stick it onto the fine wood board, align and press it flat; The stone plastic line needs to be cut at a 45 ° angle according to different specifications, and then glued with organic silicone sealant, aligning with the side panel and diagonal at the same time. This is a major characteristic of stone plastic elevator door frames, which are easy to construct, time-saving, and labor-saving.

材料的主要特性有：

The main characteristics of materials are:

1、B1级防火，火烧时无释放，无黑烟

1. B1 level fire prevention, non-toxic and non releasing during fire, with no black smoke

2、产品标准化生产，现场装配安装快捷

2. Standardized production of products, fast on-site assembly and installation

3、耐酸性、耐碱性

3. Acid and alkali resistance

4、耐摩擦，易清洁，维护成本低

4. Friction resistant, easy to clean, and low maintenance cost

5、耐久性好，使用寿命长

5. Good durability and long service life

6、不需要龙骨体系，直接粘贴可节约相当大的成本，节省了安装空间

6. No need for keel system, direct pasting can save considerable costs and installation space

7、石塑uv装饰墙板易清洁

7. Stone plastic UV decorative wall panels are easy to clean

8、石塑uv板材比重1.0—1.7g/cm3，产品轻质，有利于减少建筑物的承重及抗震

8. The specific gravity of stone plastic UV board is 1.0-1.7g/cm3, which is lightweight and beneficial for reducing the load-bearing and seismic resistance of buildings

本文由济宁电梯门套加工定制提供技术支持，更多的详细精彩内容请点击我们的网站http://www.sddtmt.com，我们将会全心全意为您提供满意的服务。

This article provides technical support for customized processing of Jining elevator door frames. For more detailed and exciting content, please click on our website http://www.sddtmt.com We will wholeheartedly provide you with satisfactory service.