不锈钢玻璃门根据玻璃的不同类型和用途，可以分为以下几种：

　　Stainless steel glass doors can be divided into the following categories based on the different types and uses of glass:

　　1.装饰玻璃门 ：

　　1. Decorative glass door:

　　包括磨砂玻璃、压花玻璃、刻花玻璃、釉面玻璃、喷花玻璃、冰花玻璃、乳化玻璃等。这些玻璃主要在于花纹和色彩的不同，具有的装饰效果和耐腐蚀性，易清洗，抗冲刷。

　　Including frosted glass, embossed glass, engraved glass, glazed glass, spray painted glass, ice glass, emulsified glass, etc. These glasses mainly have different patterns and colors, excellent decorative effects, corrosion resistance, easy cleaning, and abrasion resistance.

　　2.玻璃门 ：

　　2. Safety glass door:

　　包括钢化玻璃、防弹玻璃、夹丝玻璃和夹层玻璃。这些玻璃具有良好的采光性、易清洗性、机械强度高、热稳定性好，并且在碎裂后不飞散，有防抢、防盗、防火的作用。

　　Including tempered glass, bulletproof glass, laminated glass, and laminated glass. These glasses have good lighting, easy cleaning, high mechanical strength, good thermal stability, and do not scatter after shattering, with anti robbery, anti-theft, and fireproof functions.

　　3.玻璃门 ：

　　3. Energy saving glass door:

　　采用特殊工艺和着色，能有效吸收太阳辐射热量，实现效果。

　　By using special techniques and coloring, it can effectively absorb solar radiation heat and achieve energy-saving effects.

　　安装方法

　　Installation method

　　1.放线定位 ：

　　1. Cable laying and positioning:

　　在安装之初，需要对固定玻璃隔断及活动玻璃门扇统一放线定位，确定门框位置，并准确测量地面标高及门框顶部标高。

　　At the beginning of installation, it is necessary to uniformly lay out and position the fixed glass partition and movable glass door leaf, determine the position of the door frame, and accurately measure the ground elevation and the top elevation of the door frame.

　　2.安装门框顶部限位槽 ：

　　2. Install the top limit slot of the door frame:

　　由所弹中心线引出两条金属装饰板边线，然后按边线进行门框顶部限位槽的安装。

　　Draw out two metal decorative panel edges from the center line, and then install the limit groove on the top of the door frame according to the edges.

　　3.安装金属饰面的木底托 ：

　　3. Install wooden base with metal veneer:

　　在原预埋木砖上钉方木，或通过膨胀螺栓钉方木，把方木固定在地面上，然后用胶将金属饰面板粘在木方上。

　　Nail square timber onto the original pre embedded wooden bricks, or use expansion bolts to fix the square timber to the ground, and then use glue to stick the metal decorative panel to the timber.

　　4.安装坚向门框 ：

　　4. Install the rigid door frame:

　　按所弹中心线钉立门框方木，然后用胶合板确定门框柱的外形尺寸和位置的固定，再外包金属装饰面。

　　Nail the door frame square timber according to the marked centerline, then fix the outer dimensions and position of the door frame column with plywood, and then wrap it with metal decorative surface.

　　5.玻璃门扇安装 ：

　　5. Installation of glass door leaf:

　　使用玻璃吸盘器或玻璃吸盘机把厚玻璃吸紧吸住，通过2~3人把厚玻璃板抬起并竖立起来移安装地点准备就位。

　　Use a glass suction cup or a glass suction cup machine to tightly suck the thick glass, and have 2-3 people lift and stand the thick glass plate to move it to the installation site for preparation.

　　6.玻璃固定 ：

　　6. Glass fixation:

　　在底托木上的内外钉两根扁方木条把厚玻璃夹在中间，留出适当空隙，然后在扁方木条上涂刷全能胶将饰面金属板粘卡在方木及两根扁方木条上。

　　Nail two flat square wooden strips inside and outside the bottom support wood to sandwich the thick glass in the middle, leaving a suitable gap. Then apply universal glue on the flat square wooden strips to stick the decorative metal plate to the square wood and the two flat square wooden strips.

　　7.注玻璃胶封口 ：

　　7. Glass glue sealing:

　　在顶部根位槽双侧空隙内及底托玻璃槽口的双侧和厚玻璃与门框柱的对接处注入玻璃胶。

　　Inject glass glue into the gaps on both sides of the top root groove and the joint between the thick glass and the door frame column on both sides of the bottom glass groove.

　　8.玻璃之间对接 ：

　　8. Docking between glasses:

　　对于宽度尺寸过大的固定部分厚玻璃板，需用两块玻璃拼接，并在中间夹入金属条，涂上胶固定。

　　For fixed thick glass panels with excessive width dimensions, two pieces of glass need to be spliced together, with a metal strip sandwiched in the middle and coated with adhesive for fixation.

　　建议

　　Suggestion

　　在安装过程中，务必注意玻璃的平整度和垂直度，确保门的密封性能和美观效果。

　　During the installation process, it is essential to pay attention to the flatness and verticality of the glass to ensure the sealing performance and aesthetic effect of the door.

　　使用的安装工具和材料，如玻璃吸盘器、胶、玻璃胶等，以确保安装质量和。

　　Use professional installation tools and materials, such as glass suction cups, universal glue, glass glue, etc., to ensure installation quality and safety.

　　在安装完成后，进行的检查，确保所有连接件都牢固无松动，玻璃无破损。

　　After installation, conduct a comprehensive inspection to ensure that all connections are secure and not loose, and that the glass is not damaged.

　　本文来自：山东不锈钢玻璃门更多的内容请点击：http://www.sddtmt.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

　　This article is from Shandong Stainless Steel Glass Doors. For more content, please click: http://www.sddtmt.com We will provide satisfactory service for the questions you ask. Welcome to call us!