The stone plastic elevator door cover with good quality is used in the elevator cover decoration. It has the characteristics of uniform design and color, reasonable and moderate price, no radiation and convenient construction. It can be pasted with structural glue or glass glue in the installation. These auxiliary materials are common in the market and the price is not high. Because the base material is solid, there is no need to worry about easy breakage and frequent replenishment.

反之便宜，质量差一些pvc发泡材质门套线相对来说比较脆弱缺乏韧性不易安装。这种材质表面与石塑电梯门套没有太大差别，但是他的成分和寿命都远不如石塑电梯门套，不到三个月就会造成断裂变形，频繁补货，售后麻烦，造成得不偿失的结果。

On the contrary, the price is cheap and the quality is poor. Some PVC foam door pocket lines are relatively fragile, lack toughness and difficult to install. The surface of this material is not much different from the stone plastic elevator door pocket, but its composition and service life are far inferior to the stone plastic elevator door pocket. It will cause fracture and deformation, frequent replenishment and after-sales trouble in less than three months, resulting in the result that the gains outweigh the losses.

石塑电梯门套是包裹墙体的装饰线条，主要包括石塑线条和石塑侧板两部分。现在市面上可以用于电梯套的主要制作材质有仿石材，大理石，不锈钢、木塑、密度板、原木、石膏、镁铝合金等。不论那种材质，在这个多元化的市场上，都有不同的档次和不同的，石塑电梯门套作为一种性价比较高的选择，也是需要我们认真考量的。

Stone plastic elevator door pocket is a decorative line wrapped around the wall, mainly including stone plastic line and stone plastic side plate. At present, the main materials that can be used for elevator sleeves on the market are imitation stone, marble, stainless steel, wood plastic, density board, log, gypsum, magnesium aluminum alloy, etc. No matter what kind of material, in this diversified market, there are different grades and prices. As a cost-effective choice, stone plastic elevator door pocket also needs our careful consideration.

装配式电梯门套是频繁使用的一种产品，但是由于使用不当等原因，很容易造成发霉的现象，严重影响其门套的使用，所以就需要我们详细了解，门套处置发霉现象的方法，以便更好的进行。

Assembled elevator door pocket is a frequently used product, but due to improper use and other reasons, it is easy to cause moldy phenomenon and seriously affect the use of door pocket. Therefore, we need to know in detail the methods of handling moldy phenomenon of door pocket, so as to better solve it.

一：电梯套的细木工板与墙面接触的中间刷清漆，多刷几道，这样一来可以挡住从墙体传到门套的水汽。

1： The middle of the contact between the joinery board of the elevator sleeve and the wall shall be painted with varnish and painted several more times, so as to block the water vapor from the wall to the door pocket.

二：如果卫生间不设门槛石，从表面辨别品质好的仿大理石电梯门套那么电梯门套要和空中空出一段距离，装配式电梯门套这样就可以挡住从卫生间空中渗入门套的水汽。

2： If there is no threshold stone in the bathroom and the imitation marble elevator door pocket with good quality is identified from the surface, the elevator door pocket should be free from the air. The assembled elevator door pocket can block the water vapor penetrating into the door pocket from the bathroom air.

三：靠卫生间一面的门套线选择用瓷砖，石材，这些材料外观漂亮且不怕水。

3： The door pocket line on one side of the bathroom is made of ceramic tiles and stones. These materials have a beautiful appearance and are not afraid of water.

四：在门板的背面贴上一层防火板，这样可以挡住室内向电梯门套渗入的水汽。

4： A layer of fireproof board is pasted on the back of the door panel, which can block the indoor water vapor penetrating into the elevator door pocket.

在装配式电梯门套的发霉处置上，具体可参考上述这四种方法进行，从而更好的保证产品的使用，减少损坏情况。

The moldy disposal of assembled elevator door pocket can refer to the above four methods, so as to better ensure the use of products and reduce damage.