Introduction to stainless steel door

不锈钢门就是是用不锈钢钢板材料加工而成的门，和普通的门外观一样，主要材料是不锈钢+木板作为趁板，所以能起到防盗门作用，可以采用模具制作各种不同的门花件，住宅小区用的多，一般用做入户门，保护内门不被破坏！

The stainless steel door is a door made of stainless steel plate. Like the ordinary door view, the main material is stainless steel+wood plate, so it can play the role of anti-theft door. You can use molds to make various door flowers. The residential area uses many of them as entrance doors, to protect the internal door from being damaged!

不锈钢板门是用厚度在1.5mm以上的不锈钢板直接剪裁弯型后焊接成型的，没有管子骨架,结构紧凑效果好，不过因为造价太高很少有人做。骨架门现在比较时兴，用不锈钢矩管焊接好框架再在外面覆盖一层0.8mm左右的不锈钢板和骨架点焊起来，中间一般镂空装上装饰花，也比较美观。不锈钢门也分纯不锈钢板门和不锈钢骨架门。

The stainless steel plate door is directly cut, bent and welded from the stainless steel plate with a thickness of more than 1.5mm. It has no pipe skeleton and has a compact structure and good effect. However, because of the high cost, few people make it. The skeleton door is quite fashionable now. The frame is welded with a stainless steel rectangular tube, and then covered with a layer of stainless steel plates about 0.8mm outside. The skeleton is spot welded. The middle is usually hollowed out and decorated with decorative flowers, which is also beautiful. Stainless steel doors are also divided into pure stainless steel plate doors and stainless steel skeleton doors.

不锈钢门的选购

Selection and purchase of stainless steel doors

消费者在买不锈钢门时，都是希望自己能够买到一扇好的不锈钢门。那么如何才能选到一扇好不锈钢门呢?

When consumers buy stainless steel doors, they hope they can buy a good stainless steel door. So how can we choose a good stainless steel door?

现在的不锈钢防盗门有平开式、推拉式、折叠式、栅栏式等结构形式，家庭主要用平开式。选购时应从四个方面考虑其质量和防盗性能：

At present, stainless steel security doors are of flat type, push-pull type, folding type, fence type and other structural forms. The family mainly uses flat type. The quality and anti-theft performance should be considered from four aspects when purchasing:

1.合格证必须有法定检测机构出具的检测合格证，并有生产企业所在省级×××(局)技术防范部门发放的技术防范产品准产证。

1. The certificate must have the certificate of inspection issued by the statutory inspection institution and the provincial level where the manufacturer is located ××× (Bureau) Production permit of safety technology prevention products issued by the safety technology prevention department.

2.材质目前较普遍用不锈钢，美观、耐用、防锈蚀。主要看两点：①牌号现流行的不锈钢门材质以牌号302、304为主;②钢板厚度门框钢板厚度不小于2cm，门扇前后面钢板厚度一般在0.8cm～1cm之间，门扇内部设有骨架和加强板。

2. At present, stainless steel is widely used, which is beautiful, durable and rustproof. Two main points to look at: ① The popular stainless steel doors are mainly made of 302 and 304; ② The thickness of the steel plate of the door frame shall not be less than 2cm. The thickness of the steel plate in front of and behind the door leaf is generally between 0.8cm and 1cm. The frame and reinforcing plate are set inside the door leaf.

3.锁具合格的防盗门一般采用三方位锁具或五方位锁具，不仅门锁锁定，上下横杆都可插入锁定，对门加以固定。大多数门在门框上还嵌有橡胶密封条，关闭门时不会发出刺耳的金属碰撞声

3. The anti-theft door with qualified lock generally adopts three-way lock or five way lock. Not only the door lock can be locked, but also the upper and lower crossbars can be inserted to lock and fix the door. Most doors are also embedded with rubber sealing strips on the door frame, which will not make a harsh metal collision sound when closing the door

4.不锈钢门工艺质量注意看有无开焊、未焊、漏焊等缺陷，看门扇与门框配合等所有接头是否密实，间隙是否均匀一致，开启是否灵活，油漆电镀是否均匀牢固、光滑等。

4. The process quality of stainless steel doors shall be checked to see whether there are defects such as open welding, lack of welding, missing welding, etc., whether all joints such as door leaf and door frame are tight, whether the gap is uniform, whether the opening is flexible, and whether the paint electroplating is uniform, firm, smooth, etc.

以上就是为大家介绍的有关济南不锈钢玻璃门的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com

The above is a detailed introduction to Jinnan stainless steel glass door. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.sddtmt.com