Preventive measures for stone plastic elevator door pocket

1、线角不直、缝格不匀、不直：主要是施工前没有认真按照图纸尺寸，核对结构施工的实际尺寸，以及分段分块弹线不细、拉线不直和吊线校正检查不勤等原因所造成。

1. The line angle is not straight, the joint grid is uneven, and it is not straight: it is mainly caused by the fact that the actual size of the structure construction is not checked carefully according to the drawing size before construction, as well as the reasons such as the line snapping in sections and blocks is not thin, the stay wire is not straight, and the suspension wire is not corrected and checked frequently.

2、石塑电梯门套外饰UV装饰板材面层颜色不一：主要原因花色不是同种，施工时没有进行试拼和认真的挑选花色型号。

2. The exterior decoration of stone plastic elevator door pocket UV decorative plate surface has different colors: the main reason is that the design and color are not the same, and there is no trial assembly and careful selection of design and color models during construction.

3、电梯套打胶、嵌缝不细：立面凹凸变化的节点、UV装饰板材和石塑线条交接处、窗台与墙面等交接处。操作人员要认真坚持有人检查与无人检查一个样，其次管理人员要一步一个脚印，每一块完成后都要进行认真仔细的检查验收。

3. The elevator sleeve is not well glued and caulked: the nodes with concave convex changes in the facade, the junction of UV decorative plates and stone plastic lines, and the junction of windowsill and wall. First of all, the operators should carefully adhere to the same principle that the inspection by someone is the same as that by no one. Secondly, the management personnel should make a step-by-step inspection and acceptance after each piece is completed.

4、电梯门套墙面脏、斜视有胶痕：其主要原因是多方面的，一是操作人员要养成随干随清擦的良好习惯；二是操作工艺造成，即自下而上的板材安装方法和工艺直接给成品保护带来一定的难度，高度越高其难度就越大；三是要加强成品保护的管理和教育工作；四是竣工前要自上而下的进行完全的清擦。

4. The elevator door pocket wall is dirty and squinted with glue marks: the main reasons are various. First, the operators should develop the good habit of cleaning as soon as they dry; Second, it is caused by the operation process, that is, the bottom-up plate installation method and process directly bring certain difficulty to the finished product protection, and the higher the height, the greater the difficulty; Third, we should strengthen the management and education of finished product protection; Fourth, complete cleaning should be carried out from top to bottom before completion.

以上就是为大家介绍的有关装饰线板的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddtmt.com

The above is a detailed introduction to the decorative line board, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sddtmt.com