以前，很多地产项目，仅一层安装电梯大门套，其他层电梯厅门入口，并无前饰。但随着地产的高端化，越来越多的电梯厅门入口不再是大白墙，而是全部层采用厅门包套。而大门套的选择常见的就是不锈钢材质。但电梯不锈钢大门套到底该如何选择，我们先从材质说起。

　　In the past, many real estate projects only installed elevator door covers on one floor, and there were no front decorations at the entrance of the elevator hall doors on other floors. But with the high-end development of real estate, more and more elevator hall entrances are no longer large white walls, but all floors are covered with hall door covers. The most common choice for the large door frame is stainless steel material. But how to choose stainless steel door covers for elevators? First, let's start with the material.

　　一、 不锈钢是什么钢？

　　1、 What is stainless steel?

　　不锈钢是钢的一个种类，钢是指含有碳（C）量在2%以下的称之为钢，大于2%是铁。钢在冶炼过程中加入铬（Cr）、镍（Ni）、锰（Mn）、硅（Si）、钛（Ti）、钼（Mo）等合金元素改善了钢的性能使钢具有了耐腐性（即不上锈）就是我们常说的不锈钢。

　　Stainless steel is a type of steel, which refers to steel containing less than 2% carbon (C) and more than 2% iron. Adding alloying elements such as chromium (Cr), nickel (Ni), manganese (Mn), silicon (Si), titanium (Ti), molybdenum (Mo), etc. during the smelting process improves the properties of steel and gives it corrosion resistance (i.e. no rust), which is commonly known as stainless steel.

　　二、为什么不锈钢有不同的钢号？

　　2、 Why are there different grades of stainless steel?

　　不锈钢通常被分为201、202、301、304、309s、310s、410、420、431等多种型号。其中，201、202、301、304、309s、310s属于奥氏体不锈钢，不含有磁性，可耐多种介质腐蚀。410、420、431则属于马氏体不锈钢，具有磁性、强度高，但塑性和可焊性较差。其中硫磷含量是一很重要指标，碳素结构钢和碳素结构钢就是根据它划分的：硫，磷含量皆不超过0.04％的钢，称为钢；硫含量不超过0.03％，磷含量不超过0.035％的钢称为钢；硫磷含量各不超过0.025％的钢称为特级质量钢。

　　Stainless steel is usually divided into various types such as 201, 202, 301, 304, 309s, 310s, 410, 420, 431, etc. Among them, 201, 202, 301, 304, 309s, and 310s belong to austenitic stainless steel, which does not contain magnetism and can withstand corrosion from various media. 410, 420, and 431 belong to martensitic stainless steel, which has magnetism and high strength, but poor plasticity and weldability. The sulfur and phosphorus content is an important indicator, and carbon structural steel and high-quality carbon structural steel are classified based on it: steel with sulfur and phosphorus content not exceeding 0.04% is called high-quality steel; Steel with sulfur content not exceeding 0.03% and phosphorus content not exceeding 0.035% is called high-grade high-quality steel; Steel with sulfur and phosphorus content not exceeding 0.025% is called premium quality steel.

　　传统不锈钢电梯门套以木工板框架打好基础，不锈钢折板包，施工速度较慢，人力成本较高，两人一组，平均每日安装仅10套左右。

　　Traditional stainless steel elevator door frames are based on a wooden board frame and wrapped in stainless steel folded plates, which results in slower construction speed and higher labor costs. Two people work in groups, and the average daily installation is only about 10 sets.

　　本文由 济南不锈钢电梯门套厂家 友情奉献.更多有关的知识请点击http://www.sddtmt.com/     真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan stainless steel elevator door frame manufacturer. For more related knowledge, please click http://www.sddtmt.com/ Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned