不锈钢玻璃门的不锈钢包边制作方法

The method of making stainless steel edging for stainless steel glass doors

　　把已经裁割好并经倒角的厚玻璃上下分别装好上下横挡，定好门扇的高度（高度包括上下横在内），如果门扇高度不够，可用上下横挡内玻璃边口处，填垫薄木夹板条进行调整，如果门扇高度超过安装尺寸，则需请玻璃工裁去厚玻璃门扇的多余部分，因此门扇的玻璃高度宁可短点也不宜过高高度确定后应立即把玻璃与上下横挡进行固定。

Install the upper and lower crosspieces of the thick glass that has been cut and chamfered respectively, and set the height of the door leaf (including the upper and lower crosspieces). If the height of the door leaf is not enough, it can be adjusted by filling thin wood splint strips at the edge of the glass inside the upper and lower crosspieces. If the height of the door leaf exceeds the installation size, it is necessary to ask a professional glassman to cut off the excess part of the thick glass door leaf. Therefore, the glass height of the door leaf should be shorter rather than higher. After determining the height, the glass should be fixed with the upper and lower crosspieces immediately.

　　其方法是在厚玻璃与上下金属横挡内的两侧空隙处同时插入小木条，并轻轻敲入其中，然后在小木条、厚玻璃与金属横挡空隙之间注入玻璃胶，把玻璃与金属横挡的空隙缝口用玻璃胶封严。

The method is to insert small wooden strips into the gaps on both sides of the thick glass and the upper and lower metal crosspieces, and gently tap them in. Then, inject glass glue between the small wooden strips, thick glass, and metal crosspieces, and finally seal the gaps between the glass and metal crosspieces with glass glue.

　　那叫无框玻璃门,先把玻璃按尺寸切好,用玻璃胶安装在门框上面,门与门用门夹和地弹簧连接.然后用不锈钢包边(也可以用铝塑板和石膏板等材料包边)包边里面要有木龙骨打底的。

That's called frameless glass door. First, cut the glass according to the size, install it on the door frame with glass glue, and connect the doors with door clips and floor springs. Then, use stainless steel edging (aluminum plastic board and gypsum board can also be used for edging). The edging should have a wooden keel as the base.

　　无框玻璃门，钢化玻璃上下用门夹外包不锈钢，下门夹跟地弹簧连接，上门框用铁方管焊接外包不锈钢与上门夹连接。

Unframed glass door, tempered glass is wrapped in stainless steel with door clips on top and bottom, and the lower door clip is connected to the ground spring. The door frame is welded with square iron pipes and wrapped in stainless steel to connect to the door clip.

　　有框玻璃门用矩形钢管焊接镶钢化玻璃外包不锈钢，门框用矩管焊接外包不锈钢，门与门框用合页固定。

Framed glass doors are welded with rectangular steel pipes, tempered glass is wrapped in stainless steel, door frames are welded with rectangular pipes and wrapped in stainless steel, and doors are fixed with hinges.

以上就是有关： 山东不锈钢玻璃门 的介绍，想了解更多的内容请点击：http://www.sddtmt.com 我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to Shandong stainless steel glass doors. For more information, please click: http://www.sddtmt.com We will wholeheartedly provide you with full score service. Welcome to call us!